Analysis of effect of the load force for a bevel gear tooth having straight direction

Sándor Bodzás

doi:10.14232/analecta.2019.1.1-10

Authors

Sándor Bodzás University of Debrecen http://orcid.org/0000-0001-8900-2800

DOI:

https://doi.org/10.14232/analecta.2019.1.1-10

Keywords:

bevel gear, tooth, TCA, CAD, normal, pinion

Abstract

Knowing of the geometric designing process of a straight bevel gear we have worked out a computer aided software with which this designing process could be eased. We have designed some bevel gear pairs having concrete geometry in the function of the modification of the number of teeth of the pinion and created the CAD (Computer Aided Designing) models of these gear pairs. After that the TCA (Tooth Contact Analysis) analysis could be followed. The load force have been situated on the top of the tooth edge on the tip circle. The established normal stress, normal elastic strain and normal deformation could be analyzed. Based on the results we can create the necessary diagrams and define the conclusions.

Downloads

Download data is not yet available.

References

J., Argyris, A., Fuentes, F. L., Litvin, Computerized integrated approach for design and stress analysis of spiral bevel gears, Computer methods in applied mechanics and engineering, Elsevier, 2002, pp. 1057 - 1095

S. Bodzás, Tooth Contact Analysis of Straight Bevel Gears in the Function of the Modification of Number of Teeth of the Driving Gear, International Journal of Automotive and Mechanical Engineering (IJAME), 2019 (during the publication process)

I., Dudás, Gépgyártástechnológia III., A. Megmunkáló eljárások és szerszámaik, B. Fogazott alkatrészek gyártása és szerszámaik, Műszaki Kiadó, Budapest, 2011.

D. W., Dudley, „Gear Handbook”, MC Graw Hill Book Co. New York-Toronto-London, 1962.

A., Fuentes, J. L., Iserte, I., Gonzalez – Perez, F. T., Sanchez – Marin, Computerized design of advanced straight and skew bevel gears produced by precision forging, Computer methods in applied mechanics and engineering, Elsevier, 2011, pp. 2363 - 2377

V., Goldfarb, E., Trubachev, N., Barmina, Advanced Gear Engineering, Springer, 2018, p. 197., ISBN 978-3-319-60398-8

K., Gupta, N., Kumar Jain, R., Laubscher, Advanced Gear Manufactruing and Finishing, Classical and Modern Processes, Academic Press, Elsevier, India, 2017, p. 219, ISBN 978-0-12-804460-5

F. L., Litvin, A., Fuentes, Gear Geometry and Applied Theory, Cambridge University Press, 2004., ISBN 978 0 521 81517 8

F. L., Litvin, A fogaskerékkapcsolás elmélete. Műszaki Könyvkiadó, Budapest, 1972.

V., Rohonyi, Fogaskerékhajtások. Műszaki Könyvkiadó, Budapest, 1980.

Z., Terplán Gépelemek IV., Kézirat, Tankönyvkiadó, Budapest, 1975., p. 220.

http://mechanicalmania.blogspot.com/2011/07/differential-introduction.html

H. F., AL-Qrimli, A. M. Abdelrhman, K. S. Khiled, Numerical and Theoretical Analysis of a Straight Bevel Gear Made from Orthotropic Materials, Jordan Journal of Mechanical and Industrial Engineering (JJMIE), Volume 11, Number 1, 2017, pp. 35 – 40, ISSN 1995-6665

Q. L. Zeng, K. Wang, L. R. Wan, Modelling of Straight Bevel Gear Transmission and Simulation of Its Meshing Performance, International Journal of Simulation Modelling (IJSIMM), 2018, pp. 521-533, ISSN 1726-4529